• Opening Hours.
    Closed All Day (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Magura MT7 BAT Adjuster Kit

Product code: 13252

$9.64

In stock

Magura MT7 BAT Adjuster Kit

- Direct replacement bite point adjustment BAT adjuster dial kit, suitable for use on the Magura MT7 brakes.
- Comes complete with BAT adjuster dial, spring and retention clip.
- Sold individually, suitable for one lever.
- For easy removal and installation, pull the brake lever slightly when trying to remove the dial and pin from the body - this will free the mechanism up and allow it to slide out. Slightly pulling the lever when adjusting the dial will also improve it's wear life.

Questions

David searle

I have MT7s which came on a cube about 3 years ago. They do not have a BAT on them but they do seem to have a place where it goes with a cap and spring. Do I just remove this and insert the BAT. If so how do I remove it?

Posted by David searle

Reply from TartyBikes

Hi David!
To remove the BAT adjuster, or the blanking cap, you just need to press the little round clip on the underside of the lever body upwards towards the body, then rotate it 90. If you look at the second product image you can see the clip there, and see that there's a longer, open slot and a shorter one. You need to rotate the cap so that the longer open slot lines up with the two 'pegs' that protrude from the adjuster/blank plug. The spring will then help it come off (be careful it doesn't go missing!).
It can be a bit fiddly to do, but once you've removed it the plug will come out fairly easily. You may need to very slightly pull the lever to get it to go through, or to install the new BAT Adjuster.
Hopefully this helps, but if you need any more assistance please ask.

Reviews

Write a review

Not yet rated

People who bought this also bought…

Magura Disc Rotor Bolts (pack of 12)

Product code: 13545

£6.00

£6.00

  • Set of 12 bolts!

£6.00

In stock In stock

Add to basket

In stock

In stock

Stan Titanium Hope Reservoir Cap Bolt (Pair) M3 x 8mm

Product code: 12071

£7.50

100%

1 offer available

Spend £50 on Stan products, get 10% off

£7.50

  • Add some bling to your Hope reservoir caps!

£7.50

On order On order

Stock reminder

On order

On order

Inspired Banner

Product code: 11297

From £10.00 to £20.00

From £10.00 to £20.00

From £10.00 to £20.00

In stock In stock

View options

In stock

In stock

  • © TartyBikes Ltd, 2020
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by tame

Top

Worldwide Delivery Available

We can deliver to United States and many other countries. Click here for further info.