• Opening Hours.
    Fri: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Jitsie Forged ISIS Cranks

Product code: 12911

$43.82

In stock

Jitsie Forged ISIS Cranks

160mm
165mm
170mm
175mm

Sold out

- High quality forged ISIS cranks from Jitsie!
- Forged from 7075 aluminium for maximum toughness.
- ISIS spline will work with any ISIS splined bottom bracket.
- Large scoops removed from the rear face of the cranks saves a good portion of weight.
- Standard 1.37" x 24tpi thread is compatible with most threaded freewheels and sprockets. All lengths have enough thread to be used with a bashring if you wish.
- 9/16" pedal thread works with all pedals we stock.
- Available in black with laser etched graphics, in 160mm, 165mm, 170mm or 175mm lengths.
- Weight: 517.4g (160mm), 521.1g (165mm), 549g (170mm), 560.1g (175mm)
- Offset: 33mm

Additional Information

Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check crank bolt torque is at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely damage your cranks and this will not be covered under warranty.

Please note that the minimum required thread contact between crank arm and sprocket/freewheel is 7mm, and a 1.37" sprocket/freewheel with maximum internal thread diameter 33.80mm (NOT 1.375") must be used. Failure to adhere to this instruction will damage the cranks threads and this is not covered under warranty.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

Not yet rated

People who bought this also bought…

Trialtech KMC Z610 HX, 3/32''

Product code: 10508

£12.00

100%

£12.00

  • The 'go to' chain for most riders!

£12.00

In stock In stock

Add to basket

In stock

In stock

Jitsie 100HS Race Front

Product code: 12668

£65.00

Front Non Disc Hubs

2 colours available

£65.00

2 colours available

  • Available in: 28h only

£65.00

In stock In stock

View options

In stock

In stock

Coustellier HS33 Pads

Product code: 12686

£28.00

100%

£28.00

  • The legendary Coustellier brake pads!
  • Hand made in France.
  • Work best with: Medium grind.

£28.00

In stock In stock

View options

In stock

In stock

  • © TartyBikes Ltd, 2019
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top

Worldwide Delivery Available

We can deliver to United States and many other countries. Click here for further info.