• Opening Hours.
    Thu: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Monty Chain Tugs (pair)

Product code: 12977

£5.00

In stock

Monty Chain Tugs (pair)

- Twin-bolt style chain tugs from Monty!
- Suitable for use only on frames with long dropouts (eg. old Onza frames) due to the length of the tug.
- Shortest possible distance between centre of axle and tensioning bolts: 19mm
- Longest possible distance between centre of axle and tensioning bolts: 34mm
- Square notch on the inside face ensures the tug is kept parallel with the dropout.
- Two bolt design means the ends of your dropouts don't necessarily need to be level with each other.
- If you are unsure if these will fit your frame, please get in touch!
- Weight: 50g (pair)

Questions

Connor

Does it fit on a Monty 221 pr

Posted by Connor

Reply from TartyBikes

Hi Connor!
For the 221PR, we'd recommend snail cams ideally. The dropouts are relatively short, so you'll run less risk of compatibility issues by going with some cams compared to going for tugs and finding that with your preferred gear ratio you don't have enough adjustment.
If you've had problems with cams slipping before, going for some notched snail cams (such as the Trialtech Sport Cams) can help keep them in places. Cleaning up the axle bolts or nuts and any washers used with them will help too, as will using plenty of grease on the threads when you tighten them up!
If you need any more help, feel free to ask.

Blake c

Will these tugs fit a 2011 Onza sting?

Posted by Blake c

Reply from TartyBikes

Hi Blake!
I believe these should fit your Sting fine, although if you have your bike built up at the moment I'd recommend measuring from the centre of the axle to the rear of the dropout. If that distance is less than 19mm then unfortunately these tugs won't have enough adjustment to work properly. Likewise if the distance is greater than 34mm they won't work.
If you're looking for alternatives, the Gusset Kojak Tugs (Product code: 170) would be a great option.

Harry Gascoyne

Hi What size is the axle hole on these products? My axle is 10mm would they fit that size?

Posted by Harry Gascoyne

Reply from TartyBikes

Hi Harry - These snail cams are drilled to be used with a 10mm axle so should work perfectly. All of our snail cams, unless otherwise stated, are for 10mm axles so we have a wide range to choose from that should suit your hub! Thanks, Mark

Yifeng

Will these fit an Ozonys Styl frame? Thanks.

Posted by Yifeng

Reply from TartyBikes

Hello - Unfortunately, we don't have experience with this setup but believe it should work. Thanks, Mark

Dave

Are these sold individually or as a pair?

Posted by Dave

Reply from TartyBikes

Hi Dave - These are sold as a pair. Thanks, Mark

Vladyslav Garkusha

Hi Tarty, can I use these with a 221pr and echo 116 hub?

Posted by Vladyslav Garkusha

Reply from TartyBikes

Hi Vladyslav - thanks for your question. No - those frames have shorter dropouts than these chain tugs can work with, and they are designed for use with snail cams. Thanks, Flipp.

Reviews

Write a review

Not yet rated

People who bought this also bought…

£1.00

In stock In stock

Add to basket

In stock

In stock

Koxx Trial Lessons

Product code: 10389

£9.99

£9.99

RRP: £23.00

Save 57%

£9.99

RRP: £23.00

Save 57%

In stock In stock

Add to basket

In stock

In stock

Echo Rim Tape

Product code: 10532

£2.50

60%

£2.50

Check Stock

Check Stock

  • © TartyBikes Ltd, 2019
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top

Worldwide Delivery Available

We can deliver to United States and many other countries. Click here for further info.