• Opening Hours.
    Closed All Day (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Racing Line Lever Blade

Product code: 12241

From £20.83 to £24.17

Check Stock

Racing Line Lever Blade

Black 2015 style (5mm pivot pin)
Black 2017 style (6mm pivot for Racing Line lever only)
Red 2015 style (5mm pivot pin)
Red 2017 style (5mm pivot for 2005-2010 HS33)

Sold out

- High quality fully CNC-machined lever blade from Racing Line.
- Minimal design saves weight where possible without compromising performance.
- 4-finger length offers 16% more power when compared with a standard 2005 series 2-finger Magura lever blade.
- Available with 5mm diameter pivot pin, as found on 2005-2010 Magura HS33 levers and the first generation Racing Line levers.
- 6mm pivot pin option also available to fit the newer generation and latest Racing Line levers.
- Available in red or black anodised finish.
- 2017 style has laser etched graphics on the blade. - Not supplied with TPA kit or reach grub screw, although these are available separately or you can swap them from your current lever blade.
- Weight: 29.3g

Questions

alastair

with this lever, could i use the magura hs33 TPA kit? thanks

Posted by alastair on 28/10/2013

Reply from TartyBikes on 29/10/2013

Hi Alastair - yes you can. These levers (and other Racing Line spare parts) are the same dimensions as their Magura counterparts, so are fully interchangeable. Thanks, Flipp.

Matias Pioli

Hi , i want to know if this lever can be modificated to fit in the tensile tocco lever body ( pivot point hole looks bigger on the tocco ) dont care if this avoid guarantee ....

Posted by Matias Pioli on 21/12/2013

Reply from TartyBikes on 23/12/2013

Hi Matias - thanks for your question. Yes, this is possible by simply enlarging the pivot hole of the lever blade to 6mm, though as you rightly guessed this will void your warranty. Hope that helps. Thanks, Flipp.

Tom

Would this fit on a pre 05 magura hs33?

Posted by Tom on 17/06/2014

Reply from TartyBikes on 17/06/2014

Hi Tom - thanks for your question. These will work perfectly with the levers produced between 2005 and 2011 that are commonly referred to as "'05". They will not work with levers produced before 2005, commonly referred to as "'04". It will only fit levers that look like this: http://www.tartybikes.co.uk/rim_brake/magura_hs33_complete_lever_2005/c557p329.html Thanks, Flipp.

noel

hi. during the installation of these levers. will the master piston pop out and thus require rebleeding? (the brakes are already bled)

Posted by noel on 05/04/2015

Reply from TartyBikes on 07/04/2015

Hi Noel - thanks for your question. They sometimes do, and sometimes don't - it depends on whether the bleed is absolutely perfect or not. If there is just a tiny bit of air in the system, the pistons can come out. The best bet is just to have a friend hold the piston in whilst you change the blades over. It can be a touch fiddly with so many hands in the way, but it's definitely possible! Hope that helps. Thanks, Flipp.

Reviews

Write a review

Not yet rated

People who bought this also bought…

Echo TR Screw On

Product code: 10709

From £12.00 to £15.00

100%

Screw On Sprockets

1 colour available

From £12.00 to £15.00

1 colour available

From £12.00 to £15.00

In stock In stock

View options

In stock

In stock

TartyBikes V3 Chainstay Protector

Product code: 12485

£5.00

£5.00

£5.00

In stock In stock

Add to basket

In stock

In stock

Hope Lever Brass Barrel

Product code: 341

£6.00

100%

£6.00

£6.00

In stock In stock

View options

In stock

In stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top