• Opening Hours.
    Thu: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Echo TR Brake Clamps

Product code: 10700

From £5.00 to £20.83

Check Stock

Echo TR Brake Clamps

Black
Gold
Green
Grey
Orange
Orange - Single Upper Half, No Bolts
Purple
Red
Silver
Turquoise

Sold out

- CNC Machined brake clamps manufactured from 6061-T6 aluminium alloy.
- Unique design increases clamping force and removes the need for plastic cylinder washers, all you do is clamp your cylinders down and the brake pads are automatically set squarely! (Providing your frame/fork mounts are square.)
- Compatible with all Magura HS33 and Echo Hydraulic 4-bolt brakes and frames.
- 5mm of vertical adjustment.
- Available in 6 anodised colours; Black, Silver, Red, Blue, Green and Gold.
- Laser etched Echo logo on top clamp.
- Sold as a pair (one wheel).
- May come with silver or black bolts as stock is mixed.
- Weight: 44g per brake including bolts.

Additional Information

Please ensure the brake mounts on your frame are perfectly square when using these brake clamps. Since they have no cylinder washer, there is only vertical adjustment, not full 360 motion like with standard Magura 4-Bolt mounts.

Questions

Geoffrey Schild

As these have to be set squarely, will you be able to set them up on an Inspired Fourplay (last years model)? Haven't got my bike at hand at the moment. Thanks a lot! Cheers, Geoffrey

Posted by Geoffrey Schild on 29/11/2010

Reply from TartyBikes on 29/11/2010

Hi Geoffrey, Yes, that should be no problem at all. The brake mounts on the Inspired frames are amongst the best aligned we have found :-) Cheers, Adam

Liam

How well would these work on an onza comp frame as the frame is quite flexible? thanks liam

Posted by Liam on 16/12/2010

Reply from TartyBikes on 17/12/2010

Hi Liam - The flexiness of a frame doesn't really make too much difference to which clamps you need to use, as they just bolt directly to the clamp. They should fit on to the frame absolutely fine, although you may need to double check your mounts are nice and square. Because of the washer-less design of these clamps, if your mounts aren't squared off they can hold the cylinder at an angle. Running a file over the mounts should clear up any issues easily though, and allow them to work correctly. Thanks, Mark

iain

Hi - Would it be possible to use cylinder washers on these brake clamps?

Posted by iain on 02/01/2011

Reply from TartyBikes on 03/01/2011

Hi Iain - The TR clamps use a washer-less design, so you wouldn't be able to use washers with them. If you like the style of clamp but want to use cylinder washers, the Echo SL clamps would be worth a look. They also use aluminium washers so they work a bit better than traditional plastic washers too. Thanks, Mark

mark goodwill

In practice, how do these differ from the more expensive Echo SL model please? They don't have the cylinder washer

Posted by mark goodwill on 06/12/2011

Reply from TartyBikes on 07/12/2011

Hi Mark - The TR Clamps make setup a little quicker/easier if you have a rim with vertical sidewalls, although you may need to file your mounts to make sure they're square on your frame. This is because they don't use cylinder washers, and therefore lose some of the range of movement possible with clamps that use cylinder washers, such as the SLs. Overall, if you have a setup that'll work with the TR Clamps they're a good option to go for as they do make setup a little easier, but if you'd prefer to make your clamps more compatible with a wider range of setups then the SLs might be the way to go. Thanks, Mark

Ben

Can I use them on a Monty 231 Kamel?

Posted by Ben on 24/02/2012

Reply from TartyBikes on 24/02/2012

Hi Ben - As long as you remove your cylinder washers on your brake I can't see any reason why not! Thanks, Mark

george

Hi what bolts come with these clamps? Thanks

Posted by george on 26/07/2013

Reply from TartyBikes on 29/07/2013

Hi George - these clamps come with the bolts pictured on the product page. They are standard steel M5 bolts. Thanks, Flipp.

Earl

Hi - will these brake clamps work w/ the Onza Limey3? In other words, are the mounts on the Limey3 square on the frame? Thanks.

Posted by Earl on 03/09/2013

Reply from TartyBikes on 03/09/2013

Hi Earl - it's very hard to say as each frame is always slightly different. If you find they are not perfect you can simply touch them up with a file - it's usually only a very small amount you need to remove. Hope that helps! Thanks, Flipp.

Nick

Hi, How much vertical adjustment do these pads have? I am struggling to get my brake square on my rim. The pads overhang slightly :-( Thanks

Posted by Nick on 04/09/2014

Reply from TartyBikes on 08/09/2014

Hi Nick - these pads offer 5mm of vertical adjustment. Thanks, Flipp.

James tooth

Hi guys I have some HS11 mags wanting to put them on 4 bolt will theses fit them to a zona zeinth many thanks James

Posted by James tooth on 03/05/2018

Reply from TartyBikes on 04/05/2018

Hi James - These clamps should fit the Zenith, but it could be worth going for clamps more like the Echo SL or Trialtech Carthy Signature Series clamps which require you to use the plastic C-Washer on your brake cylinders. These give you more adjustment, so may be beneficial, although if you've got parallel sidewall rims then they're less important. Thanks, Mark

Reviews

Write a review

100%

Based on 5 customer ratings

niels

Echo TR Brake Clamps

Posted by niels on 30/03/2011

Some one has thinked twice and sucseeded to design/create (one of) the best user friendly brake clamp ( My opinion ). No need to use those rubber cylindre washers whitch takes a lot of time when installing the brake/ repositioning the brake.... :( just lay the brake cylindre ontop of the bottom halve/ put the top on screws the bolts through them and search for the ideal position by slide them in the lengt or slide the cylindre further in/outside and fasten them ;) Takes Ca.2 minutes to do it the right way // 'I say No name' But other brakemounts with washers takes so long for installing it corectly... Looks re also great! Nice curves and holes (for the weight). Collors you see on the pictures are even nicer in real ! I say: " RIDE THEM" ;) Greets, Niels p.s. still use them after 1.1/2 year, no dents or what so ever ;)

Kenny

Easy as pie

Posted by Kenny on 06/12/2011

These clamps makes set up really easy and quick! If you have square mounts these are idea and you will never look back!

Reply from TartyBikes on 07/12/2011

Hello - I'm glad you like the clamps! Thanks for the review.

Alex

Should be on every bike!

Posted by Alex on 17/05/2012

Best clamps on the market. Well worth the extra £5 over original HS33 clamps purely in time saved to set up the cylinders square. I got a pair of orange ones and they look pretty great against my blue rim and TNN LGMs. Took five minutes to set up and had no trouble since.

Reply from TartyBikes on 18/05/2012

Hi Alex - As long as you've got parallel rim sidewalls these clamps do make setup nice and easy! I'm glad they're working well for you. Thanks, Mark

Rourke

Echo tr brake clamps

Posted by Rourke on 19/07/2013

These brake clamps are sweet. They are easy to install, and don't move at all when using the brakes. So far I really like them!

Reply from TartyBikes on 22/07/2013

Hi Rourke - glad you're enjoying your purchase! Washerless clamps really do make setting your brake up easy! Thanks, Flipp.

People who bought this also bought…

Jitsie Ziggy 20"

Product code: 13247

£18.00

£18.00

£18.00

In stock In stock

Add to basket

In stock

In stock

TartyBikes V3 Chainstay Protector

Product code: 12485

£5.00

£5.00

£5.00

On order On order

Stock reminder

On order

On order

Magura HS33 Cylinder Washer

Product code: 27

£2.00

£2.00

£2.00

In stock In stock

Add to basket

In stock

In stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top