• Opening Hours.
    Tue: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Clean X2 Brake Clamps

Product code: 12782

£24.17

In stock

Clean X2 Brake Clamps

- New from Clean, the Clean X2 4-Bolt brake clamps!
- CNC machined in Spain from high grade aluminium.
- Minimal design helps keep weight to a minimum while offering great clamping power.
- Washerless design means the cylinder circlips are no longer necessary. All you need to do is clamp your cylinders down and the brake pads are automatically set square to the rim (providing your frame/fork mounts are square.)
- Machining on the interior and exterior of the clamps means they as well as great clamping power they are also super light - just 32.2g for the clamps themselves (without botls).
- Available in anodised red with subtle laser etched Clean logos only.
- 8.0mm of vertical adjustment.
- Supplied with steel clamp bolts.
- Sold as a complete set for one brake (two top halves and two bottom halves).
- Weight: 32.2g (Plus bolts at 16.4g)

Additional Information

Please ensure the brake mounts on your frame are perfectly square when using these brake clamps. Since they have no cylinder washer, there is only vertical adjustment, not full 360 motion like with standard Magura 4-Bolt mounts.

Questions

Albert

hi guys! when compared to the racing line clamps, do the slaves sit higher or lower in the frame with these? having trouble clearing my crewkerz frame without spacers underneath the clamps.

Posted by Albert on 05/02/2016

Reply from TartyBikes on 05/02/2016

Hi Albert - I just had a quick check and as far as washerless clamps go, the Racing Line clamps are the best option in terms of cylinder clearance. If you want to avoid using spacers under the clamps, your other option would be to run some clamps like the Trialtech Carthy Signature clamps or the Echo SL Clamps. These give similar clamp-to-mount clearance to the Racing Line clamps, but the cylinders sit much higher away from the frame. Thanks, Mark

sam ford

only spaces you would need will be the rubbers or the metal washers i have a crewerkz cleep with the WAW clamps on got the trials tech metal spaces so the clamps fit nice n smooth with no probelms. n it will be the same with the new clean clamps need the spacers under the clamps to make it work.

Posted by sam ford on 18/08/2016

Reply from TartyBikes on 19/08/2016

Hi Sam - I'm not too sure what you mean, sorry? The Clean clamps don't need cylinder washers - they use a washerless design. The lower section of the clamp is also different to the Crewkerz clamps too. Thanks, Mark

Reviews

Write a review

Not yet rated

People who bought this also bought…

  • Built from the ground up for Trials use!
  • Super high quality and durability.

£155.00

In stock In stock

View options

In stock

In stock

TNN Engineering CNC Backings

Product code: 10894

£22.00

£22.00

£22.00

On order On order

Stock reminder

On order

On order

TartyBikes V3 Stickers, 79mm x 37mm (pack of 2)

Product code: 12008

£0.50

100%

£0.50

£0.50

In stock In stock

View options

In stock

In stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top