These wheels are 100% hand built in the UK using top of the range double wall Inspired Team V3 rims, World leading Industry Nine Hydra 2 hubs and ultra dependable Sapim Race double butted spokes. A strong and light wheelset that would be a great upgrade for any street trials bike!
Industry Nine Hydra 2 SS Hubs
- Industry Nine Hydra 2 SS hubs are 100% made in the USA and are packed with market leading features and materials, including a mind-blowing 870 engagements!!
- A reinforced 145-tooth steel drive ring and 6 phased-engagement oversized pawl pockets deliver unmatched durability, handling extreme load forces and mitigating component wear over years of use.
- Rear hub features improved 870 P.O.E. (points of engagement) at .41 degrees provide instantaneous response.
- Compact 20mm freehub body is designed to give a perfect range of adjustment for single speed setups.
- Optimized hub seals reduce drag, allowing you to roll faster and further.
- Front hubs available to suit either 15x100mm or 20x110mm forks.
- Rear hubs available to suit either 12x135mm (Inspired Hex and Crewkerz Jealousy 26" plus many more) or 12x142mm frame specs.
Inspired Team V3 Rims
- The new Inspired V3 street 26" rim has been completely re-designed with some significant improvements over the previous modesl.
- Tested extensively by Inspired team riders Joacim Lundgren, Mario Neurauter, Giulio Porcario and Jack Heard who all wanted a stiffer and stronger rim, the new V3 delivers!
- New rim profile increases lateral and radial stiffness resulting in a stronger rim, and wheel.
- High grade 600 series alloy construction improves durability.
- Rather than being pinned like most rims, the Inspired Team V3 rims are joined using a precision fit internal alloy sleeve, increasing strength and stiffness at the rim join.
- The new rim profile is 36mm wide (2mm wider than the previous V2.5) helping to increase tyre stability, especially when using a low pressure tubeless set up.
- Tough anodised black finish with laser etched Inspired logos on each side of the rim.
- Tubeless compatible, we recommend using 30mm wide tubeless tape for a good tyre seal.
Sapim Race Double Butted Spokes
- Sapim Race double butted (2.0-1.8-2.0mm) spokes are the go to choice of spokes for high quality, durable wheel builds.
- 100% made in Belgium from the finest quality stainless steel, these spokes offer exceptional strength and consistency, meaning spoke tensions are more balance and wheels are more durable.
- Tough gloss black surface finish gives a stylish appearance that is durable enough to stay looking great for years of riding!
- Gloss black Sapim Polyax brass nipples completes the set.
Wheelbuilds
- Individually built by hand from start to finish in the UK.
- Every wheel is pre-stressed during the building process to bed in spokes and contact points, ensuring a strong and durable wheel frm the very first ride!
- Each spoke tension is checked and adjusted individually to ensure they are all balance and within tolerance, a critical process when building durable wheels that can take the stresses of street trials riding.
Technical Info
Facebook
Need some help?
