• Opening Hours.
    Wed: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Trialtech Sport Forged 120mm

Product code: 10429

£20.82RRP: £24.17(Save 14%)

Check Stock

Trialtech Sport Forged 120mm


Sold out

- With their advanced one-piece 3D forged construction, these Trialtech stems offer outstanding performance at an affordable price.
- This construction method uses 6061 aluminium allows for great weight saving without dramatically reducing the strength and stiffness.
- Wider bolt spacing at the bottom of the front clamp increases the strength of connection between the handlebar and stem.
- Available in 120mm length and 17 rise only.
- 40mm steerer clamp height.
- Compatible with 31.8mm handlebars only.
- Choice of anodized matt black with white logos, matt silver with black logos or powdercoat gloss white with black logos.
- Weight: 155g including bolts! (anodized models)
- Clamp height: 40mm

Steerer clamp diameter: 1 1/8"
Bar clamp diameter: 31.8mm

Additional Information

Please ensure when fitting your new stem that there is a gap of 2-6mm between the top of your steerer tube and the top of your stem's clamping area. This will ensure that your headset can tighten correctly and give your stem good support from your forks.



Hi tartybikes Can you use a 26" stem on a mod. and what is the diffrence between a 20" and a 26" stem Thanks Tom

Posted by Tom on 10/02/2011

Reply from TartyBikes on 14/02/2011

Hi Tom - 26" stems tend to be a lot lower and shorter than 20" stems, so by using a 26" stem on your mod it would change the 'feel' of the bike quite dramatically - I wouldn't recommend it! Thanks, Mark


can I put this on any bike stem 24?

Posted by Frantisek on 21/02/2014

Reply from TartyBikes on 21/02/2014

Hi Frantisek - this stem will fit a 24" bike just fine. Thanks, Flipp.


Should I re-Stem? My Echo 26 with Rockman spade forks, Vis 720 bars and trialtech sport HIGH RISE Stem, feels Like I can't make full power or distance from sidehops aor pedal kicks? Do you have a suggestion? is this stem better? My first bike the 2011 ECHO Pure felt great as did the Bjorn that Adam Built for me, but left to my own devices I've managed to muddle the whole thing. Is there a stem solution? Thanks Josh

Posted by Josh on 24/01/2015

Reply from TartyBikes on 26/01/2015

Hi Josh - thanks for your question. If the bike feels too big and that's why you're struggling for power, a shorter or lower stem might help. It's very hard for us to tell you what will make your bike feel nicer to you since everyone's different. Stems are a great way to change the feel of the bike, but you need to know how you want to change it first. Have you tried experimenting with different handlebar angles? That is a way to experiment with different lengths that costs no money! Hope that helps. Thanks, Flipp.


What's the pinch bolt size on this stem? Is it the same for all trialtech stems?

Posted by new2trials on 30/09/2016

Reply from TartyBikes on 03/10/2016

Hello - For the Sport Forged stem, you would need M6x18 bolts. That should cover most other Trialtech stems too. Thanks, Mark

Karolis Markutis

Hey, when you buy this stem, does ITcome with a cap or do I need to buy one separately? Thanks - Karolis.

Posted by Karolis Markutis on 31/08/2013

Reply from TartyBikes on 02/09/2013

Hi Karolis - this stem does not come with a top-cap. Top-caps are usually considered a part of the headset, so come with that. The exceptions are if you have a threaded steerer (like older Trialtech and Inspired Team forks) or a stem with a sloping top - in these instances a top-cap is supplied as they are usually specific to that item. Thanks, Flipp.


Write a review


Based on 4 customer ratings


Light and strong stem.

Posted by Cai on 09/01/2011

Very light stem, and as strong as a stem needs to be! I wouldn't use this stem on a frame with anything higher than a +30 BB as it has barely any rise, but on frames with a low BB rise this is the perfect stem.



Posted by DARREN on 01/08/2018


Reply from TartyBikes on 02/08/2018

Hi Darren - High praise indeed, thanks for the review!

People who bought this also bought…

TartyBikes V3 Chainstay Protector

Product code: 12485




On order On order

Stock reminder

On order

On order

TartyBikes V3 Stickers, 79mm x 37mm (pack of 2)

Product code: 12008





In stock In stock

View options

In stock

In stock

Gusset 1ER Sprocket

Product code: 418

From £4.00 to £6.00


From £4.00 to £6.00

From £4.00 to £6.00

In stock In stock

View options

In stock

In stock

  • © TartyBikes Ltd, 2018
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough