Monty 230 X-Hydra

Product code: 12515

25" rear wheel!

- A classic frame from the original biketrials brand Monty!
- Please note: This frame is exclusively for use with 25" rear wheels.
- Twin reinforcement tubes at the top of the seatstays aid the frame's strength and increase brake stiffness.
- Mounting points on the underside of the seatstays for use with the high arched Monty 2-Bolt boostser.
- Meaty 4-bolt brake mounts spaced at 96mm.
- Extensive machining to the bottom bracket yoke saves a good chunk of weight.
- For use with 27.2mm diameter seatpost.
- Slightly retro, blue and cream colour scheme looks awesome!
- 110mm long headtube suitable for use with Internal headsets.
- 135mm spaced dropouts.
- Derailleur hanger included.
- Weight: 2.092kg

Geometry (measured with a 400mm x 40mm fork):
- Wheelbase: 1025mm
- Chainstay length: 400mm
- BB Rise: -25mm
- Head angle: 73.5°
- Reach (from centre of BB shell to top centre of head tube): 675mm

Compatibility
- Headset type: Internal
- Bottom bracket type: Screw-in, 68mm shell width
- Dropout spacing: 135mm
- Brake mount type: 4-Bolt Mount
- Bashguard type: n/a - bashring required

Can you use a jump bike frame for trials

Posted by George

Reply from TartyBikes

Hi George - You can do this, although the stresses and strains put through trials frames differ from jump frames, so it may not last as long (especially the brake mounts). The geometry also won't be ideal, but for learning it is a cheap way into trials if you already have a jump bike. Thanks, Mark

Can you have a 26 wheel and rim to fit this frame

Hi George - As the product description mentions, this can only be used with a 25" rear wheel, not a 26" rear wheel. Thanks, Mark

It states that it must be used with a 25" rear rim, do you sell one and any tyres to fit?

Posted by Kaveman

Hello - Unfortunately, we don't have any rims or tyres in stock that would fit, sorry! They have been discontinued by Monty so we're unable to order any more in. Thanks, Mark