• Opening Hours.
    Mon: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Inspired Flow Plus 24"

Product code: 13178

$1054.90RRP: $1133.17(Save 7%)

In stock

Inspired Flow Plus 24"

Dispatch time 2-3 days - this bike is assembled in our workshop before dispatch. Minor assembly required on arrival, details supplied with bike.

3 upgrades available

MT4 Brake Upgrade - Can Be Added At Checkout

Hope Tech 3 Trial Zone Brake Upgrade - Can Be Added At Checkout

Magura MT7 with HC3 Blade Upgrade - Can Be Added At Checkout

  • Features Alloy forks!
  • Dual Disc Brakes as standard.
- Super high quality, robust bike from Inspired, at a new more attainable price point!
- Building on the success of previous generation Flows, but with more focused geometry and a revised spec.
- Only available in the colour shown in the photographs.
- Features alloy forks and Maxxis tyres as standard, saving weight and adding extra grip over the standard Flow.
- Supplied with dual cable disc brakes as standard to stop you faster with more control.

Frame and Forks
- Frame: Inspired Flow 24" - V-Brake and Disc Mounts. Now with updated internal headtube!
- Forks: Inspired Flow, Alloy, Disc Only

- Front hub: Trialtech Front Disc, Sealed Bearing, 32h, Black
- Rear hub: Trialtech Rear Disc, Sealed Bearing, 32h, Black
- Chain tensioner: Inspired Flow Custom
- Front rim: Inspired Flow, 24", Black
- Rear rim: Inspired Flow, 24", Black
- Spokes: Stainless Plain Gauge
- Rim tape: Kenda
- Inner tube (front): Kenda
- Inner tube (rear): Kenda
- Front tyre: Maxxis Holy Roller 24 x 2.4"
- Rear tyre: Maxxis Holy Roller 24 x 2.4"
- Front brake: Avid FR5 lever, Avid BB5 Cable Disc Brake, 180mm
- Rear brake: Avid FR5 lever, Avid BB5 Cable Disc Brake, 180mm. Disc brake mount is at +20 position.
Hydraulic disc brake upgrades available at checkout!

- Cranks: Truvativ Hussefelt, 175mm, Black (upgrade over the standard Flow model)
- Front Sprocket: Truvativ 22T (upgrade over the standard Flow model).
- Chain: KMC Z410
- Freewheel: Trialtech 16T, 72-click (upgrade over the standard Flow model)
- Pedals: Trialtech Race Platform (upgrade over the standard Flow model)
- Bottom bracket: Truvativ Howitzer (upgrade over the standard Flow model). Standard 68mm threaded shell.

- Saddle: Inspired Integrated, Black
- Seatpost: Inspired Integrated
- Seat Clamp: Inspired

- Headset: Trialtech, 1-1/8" Internal, Black
- Stem: Trialtech Forged, 31.8mm 4-bolt front clamp, 90mm x 35˚, Black
- Grips: Trialtech Race Rubber, Black
- Handlebars: Truvativ Hussefelt Comp, Black, 31.8mm clamp

- Wheelbase: 1010mm
- Chainstay: 375mm
- BB Rise: +15mm
- Head Angle: 73˚
- Centre of BB to Top Centre of Head Tube: 670mm

- Weight. 11.62kg (Including pedals)

This bike is supplied with a 6 month warranty covering manufacturing and materials defects. The warranty does not cover mistreatment or poor maintenance. Please ensure all the details on the warranty sheet supplied with the bike are adhered to. Certain circumstances (such as stripped threads or rounded crank arm tapers) only occur due to a lack of correct maintenance and all manufacturers are aware of these situations, so any claims due to incorrect maintenance procedures are much less likely to be successful.

We build this bike to a 100% complete state in our workshop before dispatch to ensure all items are manufactured correctly and nothing is missing, but we do have to remove some parts to ensure there is no damage during transit. You will need some basic tools (usually 4mm, 5mm, 6mm and 8mm allen keys and a 15mm spanner) for final assembly upon arrival. We have a video guide here to help, but please don't hesitate to contact us if you require any further assistance.

Please note that the specification on the bike may occasionally vary slightly from the photos and description. If this happens then the overall effect will be an upgrade and it will not affect the cosmetic appearance of the bike drastically.


Axel Elí Axelsson

Can this be send to iceland. And what are the difference between Flow and Flow plus.

Posted by Axel Elí Axelsson

Reply from TartyBikes

Hi Axel!
Shipping a bike to Iceland is no problem! We ship bikes worldwide every day so we're used to getting bikes to their destinations safely. If you'd like to check shipping prices, simply add a bike to your basket and click the 'View Basket' button. Our website will then calculate your options and display prices for them.
Compared to the Flow, the Flow Plus has upgraded alloy forks, upgraded Maxxis tyres, splined Truvativ crankset, cable discs as standard and upgraded finishing kit such as the pedals. You do get a lot of upgrades for the difference in price!
If you have any more questions, please ask.


Hello Tarty I would like to swap my rear hub for a HOPE PRO 4 TRIALS / SS would that be possible? If so, which other parts would I need except the hub? Thanks in advance

Posted by Markus

Reply from TartyBikes

Hi Markus!
That would be possible, but you'll need a few extra parts:
A 16t Splined Sprocket (we recommend the Trialtech Sport or Gusset DoubleSix).
A cassette lockring. A new set of 24" Spokes.

You should be able to re-use your existing rim, rim tape, tube and tyre, so getting these bits along with your new rear hub would give you the bits you'd need to re-build your back wheel with the Hope hub laced into it.
Hopefully this helps - if you have any more questions, please ask.

Anton Bugge

Is it possible to change the rear sprocket to a 12T for example if the gearing is a bit low for getting from spot to spot? In the description, it looks like the sprocket is part of the freehub. "Freewheel: Trialtech 16T, 72-click (upgrade over the standard Flow mode" Any help would be appreciated, have a nice day!.

Posted by Anton Bugge

Reply from TartyBikes

Hi Anton!
Due to the Flow Plus using a rear hub that requires a screw-on freewheel, it wouldn't be possible to lower the gearing without using a totally different rear hub (specifically the Hope Pro 4 Trials/SS Rear Hub fitted to the Team spec Inspired bikes). The hub uses a standard freewheel thread size, so 16t is the lowest it's possible to go as standard. There are 14t freewheels available but they require the smaller BMX-specific 'micro drive' thread standard.
In terms of getting spot to spot, street trials bikes aren't as fast as a BMX or mountain bike but aren't much of a problem. A lot of people interested in getting hold of one of these bikes tend to be concerned about going from A to B on them, but when they get hold of a bike and start riding it realise it isn't an issue. As an example, our team rider Ben Travis did a 3 day filming trip in London that involved riding over 26 miles in a day going from spot-to-spot and that was using the standard 22:16 gearing on an Inspired Arcade (you can see more from that trip here).
The other thing to consider with changing the gear ratio is that if you make the gearing too heavy, you greatly reduce the ability to do trials moves on the bike as you lose the instant acceleration/power you need for moves like gaps and other static-based trials moves. Dropping down to something like 22:12 would make any trials-style moves extremely difficult.
Hopefully this helps - if you have any more questions, feel free to ask.


Welche rahmengrösse hat es

Posted by DOMINIK

Reply from TartyBikes

Hi Dominik!
There is no frame size for this bike as such - Inspired only make one size of Flow Plus 24".
If you'd like to check out our Inspired height chart, please click here.


Hello. on my Flow Plus it's time to change the chainring, which chainring do i need and which tools do i need for the change? Thanks

Posted by Luca

Reply from TartyBikes

Hi Luca!
To change your chainring, you'll need a Crank Removal Tool and a few allen keys (one for your crank bolt, and one for the chainring bolts).
For the chainring itself, something like the Sunrace Chainring would be an ideal replacement. That said, any 22t chainring with a 64mm BCD would work fine so if you'd prefer a different model then as long as it has those dimensions it should fit absolutely fine.
If you have any more questions, feel free to ask.


Hi TartyBikes, does the Flow fit 26" Wheels? Thanks.

Posted by steifkartoffel

Reply from TartyBikes

The Flow is only able to be used with 24" wheels, not 26".
If you have any more questions, feel free to ask!


Write a review


Based on 3 customer ratings


Love it

Posted by David

Just built and bedded in the brakes on my new 2017 flow plus and I love it , the colour is slightly darker that the picture but I like it even more . Got the stock avid brakes as I'm a beginner and they are good enough to start on . Also had the inspired headlock fitted so I didn't have to try myself later on . Thanks to Adam who I bombarded with questions before I ordered and the people I spoke to on the phone all very helpful ( tarty bikes are the best shop I have ever dealt with ) . Just got to find a quiet place to start riding properly and get used to it . Thank you tarty bikes

Reply from TartyBikes

Hi David - It's great to hear that you like your new bike. The colour does come out a touch darker 'in real life' due to the nature of it being shot in a studio typically, but luckily it looks good in both forms. Thanks for your review - we appreciate the kind words too.


Fantastic bike & service

Posted by Robby

I bought my Flow Plus with in mind to have performance capabilities and not spend a small fortune as I haven't been on the pedals for 7 years. Shortly after receiving the bike I was impressed with the geometry and feel of the bike as well as the quality parts fitted and the color! The bike gives me confidence on the streets and I couldn't have been more pleased to be riding again. Tarty bikes your service was exceptional, you truly are the best, hands down.

Reply from TartyBikes

Thank you Robert - really glad to hear you've had a positive experience, both with us and the bike. Enjoy!


Awesome bike

Posted by Hugo

Super nice bike, awesome quality. Tartybikes sent me this bike very quick (and I'm living in Spain). Bike and seller more than recommended.

Reply from TartyBikes

Hi Hugo - I'm glad to hear you like your new bike! Thanks for the review.

People who bought this also bought…

TartyBikes V3 Stickers, 79mm x 37mm (pack of 2)

Product code: 12008




3 colours available


3 colours available

  • Now available in shiny Chrome Red finish!


In stock In stock

View options

In stock

In stock

  • Featuring a wealth of information, a complete guide for everything Trials based!
  • Makes a great gift!
  • Updated to feature Street Trials moves too.


In stock In stock

Add to basket

In stock

In stock


In stock In stock

Add to basket

In stock

In stock

  • © TartyBikes Ltd, 2020
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough


Worldwide Delivery Available

We can deliver to United States and many other countries. Click here for further info.