• Opening Hours.
    Closed All Day (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Trialtech Custom Non-Disc Rear 20" Wheel

Product code: 13257

$65.00RRP: $107.26(Save 39%)

On order

Trialtech Custom Non-Disc Rear 20" Wheel

  • Ideal for the rear of Onza Tyke, Rip or T-Vee.
- A custom rear 20" non-disc wheel, built here at TartyBikes!
- Suitable for use on the rear of bikes with a dedicated 20" rear wheel such as the Alias 20.1, Onza Tyke or Onza Rip.
- Built using a Trialtech Race Sealed Rear Hub laced to a Trialtech Sport Circle Hole 20" Rim.
- 110mm spacing is suitable for Onza frames when used with chain tugs on the outside of the dropouts, or Alias 20.1 frames with snail cams used on the inside of the dropouts.
- 32 spoke 3-cross lacing with Mutiny Plain Gauge silver spokes ensure a strong, long-lasting wheel.
- Supplied without screw-on sprocket or freewheel.
- Available with black hub and Fluro Green rim only.
- Weight: 838g

Questions

James Fryer

What's the width of the rim would it fit a bmx frame ?

Posted by James Fryer

Reply from TartyBikes

Hi James!
The Trialtech rim used is 39mm wide, so around the same width as a lot of modern BMX rims.
A couple of things to note about this wheel are that it uses a standard freewheel thread, so it won't be compatible with some of the smaller freewheels used on BMXs (minimum size would be 16t). Also, due to it being single wall and relatively lightweight compared to BMX rims it might not last as long if you're doing a lot of bigger tricks on them. Our team rider Flipp uses them on his brakeless Alias build and puts a lot of pressure through them, but it might be worth bearing in mind depending on your riding style.
The spacing should be compatible with most BMX frames, although it does use a 10mm axle rather than 14mm so that will depend on the frame you use.

Mikey

Will this fit monsterboy 20in frame

Posted by Mikey

Reply from TartyBikes

Hi Mikey!
This wheel uses a 20" rear rim, whereas for the Monsterboy frame you would need a 19" rim. As a result this won't be compatible, sorry!

Reviews

Write a review

Not yet rated

People who bought this also bought…

Trialtech Crossover

Product code: 12930

£8.50

Hoses & Fittings

6 colours available

£8.50

6 colours available

Check Stock

Check Stock

Hebo XTR Shinguards

Product code: 13409

From £30.00 to £35.00

100%

From £30.00 to £35.00

  • Super stretchy, breathable shinguards.
  • D3O-style shinguard material is flexible but gives good protection.
  • Available in 5 sizes.

From £30.00 to £35.00

Check Stock Check Stock

View options

Check Stock

Check Stock

Echo Rim Tape

Product code: 10532

£2.50

60%

£2.50

Check Stock

Check Stock

  • © TartyBikes Ltd, 2019
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

All prices listed are inclusive of sales tax at the correct rate for your country

Web Design & Development by Cox Web Design, Loughborough

Top

Worldwide Delivery Available

We can deliver to United States and many other countries. Click here for further info.