• Opening Hours.
    Thu: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Magura / Shimano Twin Caliper Hydraulic Disc Brake

Product code: 13126

From $2.19 to $522.42

Check Stock

Magura / Shimano Twin Caliper Hydraulic Disc Brake

Complete Brake System: Standard Hose Lengths, Magura MT7 4 Piston Calipers
Complete Brake System: Standard Hose Lengths, Shimano 2 Piston Calipers
Complete Brake System: Standard Hose Lengths, Shimano 4 Piston Calipers
Custom Hose Length Upcharge - Specify all three hose lengths in the notes field at checkout
HS22 lever option, with locking mechanism to give a parking brake function
HS33e lever upgrade, closer switch (Silver 4-finger lever with ball end only)
HS33e lever upgrade, opener switch (Silver 4-finger lever with ball end only)

Sold out

Supplied as standard with a 420mm lever-to-splitter hose and a pair of 1600mm long hoses from splitter to calipers, but custom lengths are available too, just add the custom length charge to the basket along with the brake and put the lengths you require in the notes field!

Please note: The Shimano 2 piston caliper system now comes supplied with Shimano BR-MT410 calipers, not the BR-MT200 pictured. These are supplied with the same pads and are the same design with a small aesthetic change to the caliper body.

  • One lever, two calipers!
  • Unique brake system.
  • Now available with either 2 or 4 piston calipers!
- Single lever with twin caliper hydraulic disc brake system comprised of a Magura HS33 Lever and a pair of Shimano MT200 Altus 2-piston calipers, Shimano MT-420 Deore 4-piston calipers, Magura MT7 4-piston calipers or Magura MT5 E-Stop 4-piston calipers.
- These brake calipers are the ones shown in the photos and designed to be used on the left hand side of a wheel / hub. They will function perfectly well fitted 'upside down' on the right hand side, but you will need to modify your mounting bracket(s) and this is not something we can assist with. The fitment type is international standard Post Mount, with 74mm spacing between bolt holes, and you can find more information about this with a Google search if required.
- A Magura Hose Splitter allows installation of the twin hoses to the calipers.
- The larger 14mm piston diameter in the Magura HS33 lever, compared to the standard piston in the Shimano or Magura disc lever, means there is no loss of power despite the lever activating two calipers.
- This system means that both front and rear brakes can be applied simultaneously via one lever.
- Ideal for use on diverse applications ranging from mountain bikes to multi-wheeled dog rigs.
- TPA system in the lever gives easy, tool-free bite point adjustment.
- Split bar clamp allows easy installation of the brake lever even with restricted space.
- Supplied with a 420mm lever-to-splitter hose and a pair of 1600mm long hoses from splitter to calipers. We can spec any length hoses to suit your project - simply select the 'Custom Hose Length' option and specify your lengths at Checkout.
- Supplied as a fully bled, ready to bolt on system (including pads) - disc brake rotors and adaptors sold separately.
- Lever upgrades are available to incorporate switches for electrical systems, such as brake lights or motor cut functions. The 'Opener' lever opens an electrical contact when the lever is pulled, the 'Closer' lever closes contact on lever application.
- Suitable for human-powered bicycles / tricycles, and electrically assisted pedal cycles / tricycles with a maximum speed of 15.5mph / 25km/h. Not suitable for solely electric powered vehicles or anything higher than the speed specified above.
- Maximum total train weight (total of vehicle, rider, cargo, etc) of any vehicle fitted with this brake system: 150kg.
- Weight: Approx 500g

We have made a disc brake guidance and information sheet which will be very useful if you are not experienced with disc brakes (or even if you are!). We strongly recommend having a look over it before fitting your new brake. This can be downloaded here.

Important Information:

To correctly fit the lever to the handlebar, the bolt with the arrows pointing towards it must be gently tightened first until the gap is closed, then the other bolt should be nipped down. Do NOT tighten this bolt right down, normally there will be a gap of around 2-3mm when the lever is tight on the bars. Over-tightening the bolts or not following this procedure is likely to crack the lever clamp and this is not covered under warranty.

How does this brake work?

Despite this being the 'wrong' lever for the calipers, this system works because the ratio of piston areas is returned to standard. If you fit two calipers to the original (or any regular disc brake) lever, this halves the amount of brake pad travel, doubles the power and doubles the amount of 'flex' at the lever. So, you cannot use a Magura Splitter with two 'normal' disc brakes.

Most disc brake levers have a 10mm piston diameter, so the area of this is around 78mm^2, and the Magura HS33 lever is a 14mm piston, giving a piston area of 154mm^2, almost exactly double. This provides the correct amount of fluid flow from lever to caliper, so the amount of brake pad travel, lever feel and power is the same as the original.

The lever doesn't have an expansion reservoir, but from previous customer feedback this doesn't seem to be an issue. Still, we can not recommend this brake where speeds will be higher than 20mph, or be subjected to multiple continuous brake applications over 15 seconds in length. Obviously a 'failure' of this type is very safe, as the brake would become gradually locked on with heat build-up, but that would still not be much fun! An expansion reservoir is required if the brake gets very hot and the fluid starts to expand, such as a downhill bike or heavy cargo trike, etc.

The brake is supplied pre-bled by us, but if you do need to bleed the system in future, there are two ways to do this. One is to bleed from one caliper, up the hose, through the lever, down the next hose and out of the second caliper. Alternatively it is possible to bleed the calipers & lines separately, then bleed the lever itself, and attach the three parts together.

Additional Information

This brake system is not suitable for electrically powered or assisted vehicles in any of the listed variations. If you are unsure if this brake system is suitable for your needs please get in touch first via email or phone and we will be happy to discuss the details with you!

These brakes use two standard calipers, which are designed to be mounted on the left side of the bike as normal (usually one on the front wheel and one on the rear wheel). If you're looking to fit this system to a 3 wheeled bicycle with both calipers mounted opposite one another on two front or rear wheels, you may need a different 'symmetrical' caliper design, which isn't something we can currently supply. Please check the fitment of your bike before purchasing, we are happy to offer advice if needed!

Questions

There are currently no questions relating to this product.

Reviews

Write a review

100%

Based on 1 customer rating

Rob

Perfect brake upgrade for trike riders.

Posted by Rob

Bought to replace a dual caliper mechanical brake across a tadpole trike front axle, the difference is night and oranges. The mechanical system due to the different cable lengths to each caliper has differing friction causing the closer brake to apply first, and only then does the tension overcome friction enough to apply the furthest brake. No such issue with this hydraulic system since all pressures are equal both calipers move in tandem. Brake steering eliminated. The other major benefit is the Magura system is silky smooth with application of force with a little finger sufficient to stop the trike, allowing for much more precise braking rather than the all-or-nothing encountered with the old system. The quality of the parts and assembly leave no scope to complain, and communication with the team at TartyBikes throughout the transaction was excellent. I literally could not be happier with this purchase.

Reply from TartyBikes

Hi Robert!
Thanks very much for your detailed review.
It's great to hear you're getting on well with your new brakes, and that they've made such a positive impact on your trike!

People who bought this also bought…

TartyBikes V4 Chainstay Protector

Product code: 12485

£4.50

100%

Chainstay Protectors

4 colours available

£4.50

4 colours available

  • New sizing, available in 4 colours!
  • Wide range of compatibility, from the steel Inspired Arcade up to the widest alloy trials frames!
  • Double stitched velcro ensures maximum life!

£4.50

In stock In stock

View options

In stock

In stock

TartyBikes Tech T-Shirt

Product code: 13929

£10.00

Jerseys

2 colours available

£10.00

2 colours available

  • Casual styling married to technical performance!
  • Super comfortable on or off the bike.

Check Stock

Check Stock

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame

Top

Worldwide Delivery Available

We can deliver to United States and many other countries. Click here for further info.