• Opening Hours.
    Thu: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Trialtech Race Forged ISIS Cranks

Product code: 13187

$38.25

Check Stock

Trialtech Race Forged ISIS Cranks

165mm
175mm

Sold out

- ISIS cranks from Trialtech, forged from high quality 6061 aluminium alloy.
- Standard 1.37" x 24 tpi thread to accept a front freewheel or screw-on fixed sprocket.
- Wide threaded section allows a bashguard to be used if desired.
- Super stiff and strong yet still light enough for competition use.
- Tough black anodised matt finish, with laser etched Trialtech bashring logos.
- Available in 165mm or 175mm lengths.
- Sold as a pair.
- Weight: 494g (165mm length), and 520g (175mm length).
- Offset: 32mm

Additional Information

Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check crank bolt torque is at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely damage your cranks and this will not be covered under warranty.

Please note that the minimum required thread contact between crank arm and sprocket/freewheel is 7mm, and a 1.37" sprocket/freewheel with maximum internal thread diameter 33.80mm (NOT 1.375") must be used. Failure to adhere to this instruction will damage the cranks threads and this is not covered under warranty.

Please note: due to the manufacturing processes used for these cranks, there may be small variations in concentricity between the freewheel and bottom bracket interfaces. This can lead to a certain amount of run out for any freewheel, sprocket or adaptor installed on the crank arm. While this isn't an issue on trials bikes, for applications requiring much higher tolerances we cannot guarantee they will be suitable. Please get in touch if you have any questions.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

Not yet rated

People who bought this also bought…

TartyBikes V3 Stickers, 79mm x 37mm (pack of 2)

Product code: 12008

£0.50

100%

Stickers

3 colours available

£0.50

3 colours available

  • Now available in shiny Chrome Red finish!

£0.50

In stock In stock

View options

In stock

In stock

IceToolz Cassette Lockring Tool

Product code: 139

£6.00

100%

£6.00

£6.00

In stock In stock

Add to basket

In stock

In stock

Hope Hose

Product code: 10809

From £5.50 to £11.00

Hoses & Fittings

2 colours available

From £5.50 to £11.00

2 colours available

  • Stainless Steel or Kevlar type, both available!

From £5.50 to £11.00

In stock In stock

View options

In stock

In stock

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame

Top

Worldwide Delivery Available

We can deliver to United States and many other countries. Click here for further info.