IceToolz Headset Rocket

Opening Hours.
Wed: 9.30am to 5.00pm (UK)
United Kingdom.
01772 32 33 33
International.
0044 1772 32 33 33

IceToolz Headset Rocket

Product code: 627

Overview
Questions

1" - 1-1/8" Headsets	$20.43
1-1/4" - 1-1/2" Headsets	$20.43

Sold out

- Very handy tool for those who like to carry out their own bike maintenance.
- Simply slide the tool through your head tube and give it a good smack... and out drops your headset cups with minimal damage.
- Much easier and neater than using a screwdriver and a hammer! - Available in two sizes:

- 1" - 1-1/8" Headsets: For removal of standard external headsets and 42 / 44mm internal headsets.
- 1-1/4" - 1-1/2" Headsets: For removal of tapered 49mm external headsets and most tapered internal headsets.

Questions

Ask a question

There are currently no questions relating to this product.

Reviews

Write a review

80%

Based on 2 customer ratings

Did not work easily with 1" threaded headset

Posted by Olly

This was hard to use on a 1" threaded headset as the edges of the tool did not grip properly on the edges of the headset cups. This meant that it would pop right through each time I hit it. Probably works fine on 1 1/8" headsets, but would not recommend on 1"

Reply from TartyBikes

Hi Oliver - Depending on the shape of the inside of your head tube (and how much overlap there is from the head tube itself to the edges of the cup), the tool will sometimes require steadying/guiding. We've used this tool on 1" headsets before with no problems (and use it regularly with 1 1/8" headsets in the workshop) so I think it may be just a specific frame/cup issue.

Carl