• Opening Hours.
    Fri: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Magura HS33 2014+ Lever

Product code: 12790

$46.02

In stock

Magura HS33 2014+ Lever

2-Finger Blade 4-Finger Blade
Black
Black/Silver Bolts N/A
Silver

Sold out

Please note standard black levers are supplied with a silver clamp and black bolts. Other variations are as shown in the product images.

- Lever body made of Carbotecture, offering a great strength-to-weight ratio!
- New forged aluminium lever blade matches the aesthetics of the 'MT' range of disc brakes (but please note these and the MT range are not cross-compatible).
- Lever blade is notably broader and slightly more rounded than previous models, making it very comfortable.
- '4-finger' lever blade model offers increased power over shorter, '2-finger' models.
- '2-finger' lever blade feels stiffer than '4-finger' counterpart.
- Two-bolt handlebar clamp means you don't have to remove your grip to get the lever on/off.
- New TPA system has the functional components made exclusively from steel to improve durability, and has indexed 90° turns to ensure it stays put.
- Reach is taken care of by the T25 screw in the front of the lever blade. Unscrewing the screw moves the end of the lever blade closer to the handlebar.
- Bleeding system is the same as the pre-2011 brakes - attach a full syringe to the slave cylinder, remove the bleed screw in the lever, then push fluid through from the bottom. Please note that a regular bleed hose will NOT screw into the bleed port, trying to do so will damage the thread.
- Lever works for either way up for both left and right hand braking, simply turn it over!
- Lever clamp may be supplied in black or silver, colour selection refers to the main body of the lever.
- Includes M9 shroud nut and olive.
- Sold individually.
- Weight: 92g

Important Information:

Bleed screw requires VERY little torque, just a 'nip' into place - maximum 0.5Nm. Sealing is created by an O Ring on the bleed screw, not by the underside of the head of the screw, so it does not need to be tight at all. Damage due to over-tightening is not covered by warranty.

To correctly fit the lever to the handlebar, the bolt with the arrows pointing towards it must be gently tightened first until the gap is closed, then the other bolt should be nipped down. Do NOT tighten this bolt right down, normally there will be a gap of around 2-3mm when the lever is tight on the bars. Over-tightening the bolts or not following this procedure is likely to crack the lever clamp and this is not covered under warranty.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

Not yet rated

People who bought this also bought…

Tr1al HS33 Pads (Pair)

Product code: 12672

£11.00

100%

£11.00

  • Great value, powerful pads!
  • Work best with: Very light grind or smooth rim.

£11.00

In stock In stock

Add to basket

In stock

In stock

Magura T-Piece Hose Splitter

Product code: 13917

£31.00

£31.00

  • Not suitable for directly mounting two disc brake calipers, of any brand, to one standard disc brake lever
  • Easy to install thanks to the use of shroud nuts and olives.

£31.00

In stock In stock

Add to basket

In stock

In stock

Jitsie Front 24"

Product code: 13098

£37.00

£37.00

  • Available in: 28h only

£37.00

In stock In stock

Add to basket

In stock

In stock

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy