• Opening Hours.
    Thu: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Echo TR Rim Brake Lever

Product code: 11473

$49.18

Check Stock

Echo TR Rim Brake Lever

Orange (inc taper point grub screw)
Red (inc taper point grub screw)

Sold out

- Replacement lever to fit Magura HS33, HS11 and Echo Hydraulic rim brakes.
- Please note: This lever is not suitable for use with Echo TR disc brake calipers.
- TPA system is much harder to damage than normal and provides a large range of adjustment.
- Lever blade pivots on brass bushings to reduce any play that may develop over time.
- Updated lever blade features a more rounded blade, with a comfortable rounded end to help prevent loss of braking power from sore fingers or blisters.
- To fit: simply undo your existing shroud nut, chop off the olive, tap a barbed fitting (not supplied) into your main hose and bleed your brake... Job done!
- Can be used as a left or right hand unit.
- Available in black with either an orange or red TPA adjuster knob.
- Weight: 77g.

Additional Information

These levers come with a 6 month warranty covering manufacturing defects and materials, which also covers the sealing of the brake. Please note that using water to bleed the brake will invalidate the warranty.



Very Important Information

In order for correct operation of the brake, you must ensure that the lip seal of the piston is inside the piston bore at all times. This is pre-set by us before dispatch. Failure to do this invalidates the leak warranty on the lever.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

60%

Based on 4 customer ratings

Rob

5 time fail

Posted by Rob

Ive had 5 of these levers and all leak. Changed o-rings. Same thing. Only one that doesnt leak too badly is one that i replaced the whole plunger and o-ring out of an old maggi lever i had cracked. Lever comfortable lever and easy to adjust on the fly... Unfortunatly the quality has just not been there for me.

Reply from TartyBikes

Hi Rob - Sorry to hear you've had so many problems with these levers. Quite a few riders seem to use them with no issues, so to have issues with 5 is very unfortunate! Apologies again for this.

Ashley

Excellent lever

Posted by Ashley

When used with magura slaves it is incredible. Owned for over a year and still perfect. Bled with water too. Could not be happier.

Reply from TartyBikes

Hi Ash - It's good to hear the lever's working well for you! Thank for the detailed review.

Smai

This lever is the best I have bought!

Posted by Smai

If you buy this lever just add some teflon and tighten the bleed screw. You will like this great brake!!!! :)

Reply from TartyBikes

Hello - I'm glad you like your lever! You may not necessarily need to use any Teflon tape on your lever, although it does help create a better seal. Thanks for the review.

Paul

Buy a real Magura lever

Posted by Paul

Leaks fluid through the bleed nipple threads, temp fixed with ptfe tape on the nipple threads. Seems to require pads to be set closer to the rim than a standard Magura lever to achieve the same feel. Lever blade is very comfy just a shame it won't fit onto a Magura lever body. I wouldn't recommend this lever to anyone especially at over £50. AVOID

Reply from TartyBikes

Hi Paul - Sorry to hear you're not happy with your lever! We've heard of a small amount of these brakes leaking from the bleed port - by using a cap head bolt (like the Magura with a Hope-style crush washer) or torquing the bleed screw to the correct 6Nm it's possible to stop that particular leak if you're having issues with it. Regarding the 'feel' of the lever, if you're used to using a 2-finger lever blade on a Magura then the TR will feel different as it's got a longer lever blade, and consequently has a little more power, and less brake pad travel. Because of that the brake will usually need to be set up a little differently. It's similar to the way that going from a 2-finger lever blade on a Magura to a 4-finger blade will require a change in your setup.

People who bought this also bought…

TartyBikes V3 Stickers, 79mm x 37mm (pack of 2)

Product code: 12008

£0.50

100%

Stickers

3 colours available

£0.50

3 colours available

  • Now available in shiny Chrome Red finish!

£0.50

In stock In stock

View options

In stock

In stock

Monty Sticker (Many styles available!)

Product code: 12615

From £0.01 to £5.00

From £0.01 to £5.00

From £0.01 to £5.00

Check Stock Check Stock

View options

Check Stock

Check Stock

Magura Cap Head Bleed Screw

Product code: 10870

£2.00

100%

£2.00

£2.00

In stock In stock

Add to basket

In stock

In stock

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy