TartyBikes : Hope Tech Trial

Reply from TartyBikes on 27/01/2011

Hi Ivan - You would need to use a Tech Trial with a #5 Caliper and a 180mm rotor, with a Post Mount to IS Adaptor. Thanks, Mark

Reply from TartyBikes on 03/03/2011

Hi Mike - The only difference between the front and rear is the length of the hose, so if you do need a longer hose then it might make sense to get the rear brake. You can always cut it down if it's too long in any case. If you have a fork with a normal IS mount (i.e. not a +20), then you'd need to buy the "Rear, 160mm (#5 Caliper, Koxx frame)" if you'd like a 160mm rotor or the "Rear, 180mm (#3 Caliper, for +20 mount)" if you'd like a 180mm rotor. Thanks, Mark

Reply from TartyBikes on 21/04/2011

Hi Will - You'd need either the Front, 160mm (#5 Caliper), or the Front, 180mm (#3 Caliper). As it's for a 20" bike, the 160mm rotor should be fine. Thanks, Mark

Reply from TartyBikes on 08/08/2011

Hi Tom - The Rear, 160mm (#3 Caliper) should work fine. Thanks, Mark

Reply from TartyBikes on 12/09/2011

Hi Adam - Either the Front, 160mm (#5 Caliper) or Front, 180mm (#3 Caliper) will fit your Ashton forks fine. The 180mm will give you a little more power, but the 160mm will give you more modulation. Thanks, Mark

Reply from TartyBikes on 22/12/2011

Hi Mickey - You'll need the Rear, 160mm (#3 Caliper) to fit your Echo frame. Thanks, Mark

Reply from TartyBikes on 28/12/2011

Hi Jake - As it mentions in the description, "Lever works both ways up so is not side-specific." Thanks, Mark

Reply from TartyBikes on 15/02/2012

Hi Jack - The Tech Trial brakes would fit fine onto the Zoot frame and fork, although you'd need to change both of the hubs on your Zoot to disc models to be able to use them. They're non-disc as standard, so you'd need to get 2 disc hubs and 2 sets of spokes too. Thanks, Mark

Reply from TartyBikes on 26/04/2012

Hi Spike - The Tech Trial brake includes the rotor and an adaptor if required. Unfortunately, Hope no longer make this brake so we are unable to order more of them sorry. This brake has been replaced by the Hope Trial Zone. Thanks, Mark

Reply from TartyBikes on 09/12/2010

Hi, The lever works both ways up so you can use it for left or right. Thanks, Adam

Reply from TartyBikes on 07/07/2011

Hi Christian - The Front 160mm Rotor/#5 Caliper or 180mm Rotor/#3 Caliper would fit fine. The 160mm rotor will offer more modulation but a little less overall power. The 180 would offer less modulation but more stopping power. Thanks, Mark

Reply from TartyBikes on 07/07/2011

Hi Christian - I'm not too familiar with that fork but it appears to be Post Mount - in that case, you'd need the Post Mount to IS Caliper adaptor (Quick find code: 011526), and a 180mm Rotor/#5 Caliper Tech Trial brake. Thanks, Mark