• Opening Hours.
    Fri: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Hope Pro 2 Evo/Pro 4 Rear Hub End Cap

Product code: 12052

From $9.86 to $18.63

In stock

Hope Pro 2 Evo/Pro 4 Rear Hub End Cap

Pro 2 Evo Trials, Silver, 10mm Bolt Up - Drive Side - HUB452
Pro 2 Evo/Pro 4 Rear X12 Thro Conversion kit - HUB242
Pro 2 Evo/Pro 4, Black, 10mm Bolt Up - Non-Drive Side - HUB459
Pro 2 Evo/Pro 4, Black, QR - Non-Drive Side - HUB461
Pro 4 135mm x 12mm Through Axle Conversion Kit - Non-Drive & Drive Side - HUB241
Pro 4 Trials, Silver, 10mm Bolt Up - Drive Side - HUB472

Sold out

Replacement end cap / spacer for the Hope Pro 2, Pro 2 Evo & Pro 4 rear hubs.

- Direct replacement end cap/spacer for the Hope Pro 2 Evo Trials hubs.
- Manufactured out of top quality materials here in the UK, at Hope's Barnoldswick factory.
- Complete with O-rings to ensure a great fit.
- Sold individually unless stated.
- Available as either:

Pro 2 Evo Trials, 10mm Bolt Up - Drive Side - HUB452 - Suitable only for drive side use with Hope Pro 2 Evo Trials hubs with a bolt up axle.

Pro 2 Evo Trials, QR - Drive Side - HUB453 - Suitable only for drive side use with Hope Pro 2 Evo Trials hubs used with a QR axle.

Pro 2 Evo/Pro 4, 10mm Bolt Up - Non-Drive Side - HUB459 - Suitable for non-drive side use with all Pro 2 Evo (standard or Trials) and Pro 4 (standard or Trials) hubs with a 10mm bolt up axle.

Pro 4 12mm Through Axle Conversion Kit - Non-Drive & Drive Side - HUB241 - This is a kit which includes the the non-drive side and drive-side end caps and is suitable for all Pro 4 (standard or Trials) hubs with a 12mm through axle and 135mm spacing. Please note that the standard bolt in 10mm x 135 axle does not have a 12mm hole through the middle, so you will need to change the axle too if you wish to convert the hub from 10mm bolt in x 135 to 12mm through x 135.

Pro 2 Evo/Pro 4, QR - Non-Drive Side - HUB461 - Suitable for non-drive side use with all Pro 2 Evo (standard or Trials) and Pro 4 (standard or Trials) hubs wtih a QR axle.

Pro 4, 10mm Bolt Up - Drive Side - HUB472 - Suitable for drive side use with all Pro 2 Evo (standard only, not Trials) and Pro 4 (standard or Trials) hubs with a 10mm bolt up axle.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

Not yet rated

People who bought this also bought…

Hope Pro 2 / Evo / 4 Labyrinth Drive Side Seal (Big)

Product code: 11514

£3.00

Other Hub Spares

2 colours available

£3.00

2 colours available

£3.00

In stock In stock

View options

In stock

In stock

Clean Splined 12T Sprocket

Product code: 14270

£15.00

£15.00

  • Also fits other brands of HG spline hubs.

£15.00

Out of stock Out of stock

Stock reminder

Out of stock

Out of stock

Jitsie Rear 26" Rim

Product code: 13099

£37.00

100%

£37.00

  • Available in: 32h only

£37.00

In stock In stock

Add to basket

In stock

In stock

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy