Telephone (International): 0044 1772 32 33 33
Telephone (UK): 01772 32 33 33
- CNC machined from billet 2014 aluminium.
- Hollow 10mm aluminium axle for use with quick release skewers only (20mm bolt-thru version also available).
- 100mm spacing, to fit all modern front forks.
- Fully sealed large cartridge bearings keep out all the mud and water and offer silky smooth running no matter what conditions you ride in.
- 6bolt IS (International Standard) bolt pattern.
- Good warranty back-up covering all disciplines of mountain biking.
- Available in 28, 32 or 36h drilling.
- Choice of six colours: Black, Silver, Red, Blue, Gold and Gunsmoke.
- Weight: 186g.
- Flange Diameter: 55mm
- Centre to Flange: 20mm
Non Disc Side:
- Flange Diameter: 55mm
- Centre to Flange: 34mm
- Hollow 10mm aluminium axle for use with quick release skewers only (20mm bolt-thru version also available).
- 100mm spacing, to fit all modern front forks.
- Fully sealed large cartridge bearings keep out all the mud and water and offer silky smooth running no matter what conditions you ride in.
- 6bolt IS (International Standard) bolt pattern.
- Good warranty back-up covering all disciplines of mountain biking.
- Available in 28, 32 or 36h drilling.
- Choice of six colours: Black, Silver, Red, Blue, Gold and Gunsmoke.
- Weight: 186g.
Hub Dimensions
Disc Side:- Flange Diameter: 55mm
- Centre to Flange: 20mm
Non Disc Side:
- Flange Diameter: 55mm
- Centre to Flange: 34mm
As used by...
Trialtech Race Splined
£4.16
Save 19%
Hope 5.1 Dot Fluid
£3.83
Trialtech Sport Forged
From £21.28 to £42.55
Save up to 12%
Echo Rim Tape
£2.55
Try-All Rubber
£5.53
Trialtech Race Platform
£21.28
Hope Tech Trial
From £135.32 to £143.83
TNN Engineering Belaey
£30.00
TNN Engineering LGM
£28.33
Rohloff Speedhub Tensioner
£56.25
On the 20mm bolt version do you still have to use a quick release? If so can you get a mod so you can just use axle bolts? It's also fine to use this on a 20" isn't it?
Posted by Craig on 30/10/2011
Reply from TartyBikes on 31/10/2011
Hi Craig - The 20mm bolt-through version only works with a 20mm bolt-through axle and fork (such as the fork seen on the Inspired Skye full bike). There's no real way of being able to use a QR or conventional bolts with it. Thanks, Mark