Telephone (International): 0044 1772 32 33 33
Telephone (UK): 01772 32 33 33
- New entry into the 24" trials frame market, the Neon Bow 24" 2012.
- Based upon the 20" and 26" Neon Bow frames from previous years, the new model features a few tweaks to increase strength and save weight where possible.
- Features Neon's standard head tube (120mm long), externally butted with a large machined out hole to save weight.
- Sleek tubing profile reduces weight whilst increasing frame strength and giving a greater weld area.
- Reinforcing plate on the underside of the chainstay and BB yoke join helps improve frame strength in this key area.
- Dedicated 4-bolt mounts (spaced at 100mm) with CNC'd built-in brake booster give a stiffer, more responsive brake feel.
- Minimal horizontal dropouts spaced at 135mm offer a range of adjustment whilst being small and out of the way.
- Thick IS disc mount with additional brace allows the use of a rear disc brake.
- Gussets placed at key points of the frame to add more strength and increase stiffness.
- Available in anodised Black only.
- Weight: 1.467kg
- Based upon the 20" and 26" Neon Bow frames from previous years, the new model features a few tweaks to increase strength and save weight where possible.
- Features Neon's standard head tube (120mm long), externally butted with a large machined out hole to save weight.
- Sleek tubing profile reduces weight whilst increasing frame strength and giving a greater weld area.
- Reinforcing plate on the underside of the chainstay and BB yoke join helps improve frame strength in this key area.
- Dedicated 4-bolt mounts (spaced at 100mm) with CNC'd built-in brake booster give a stiffer, more responsive brake feel.
- Minimal horizontal dropouts spaced at 135mm offer a range of adjustment whilst being small and out of the way.
- Thick IS disc mount with additional brace allows the use of a rear disc brake.
- Gussets placed at key points of the frame to add more strength and increase stiffness.
- Available in anodised Black only.
- Weight: 1.467kg
Geometry (When measured with 405mm x 30mm fork, sold separately)
Wheelbase: 1045mm
Chainstay Length: 360mm
BB Rise: 70mm
Head Angle: 70 degrees
Centre of BB shell to top centre of head tube: 635mm (25.00")
Tioga Factory DH
£24.99
Save 33%
Trialtech Rim Tape
£2.55
Magura Barbed Fitting
£0.85
KMC Z510, 1/8"
£6.67
Echo TR Non Disc
£29.79
