
- Super-thick butted steerer is now even stronger than previously, being a massive 8mm thick at the bottom!
- Featuring fork blades which are welded to the crown section at a more shallow angle (closer to 90 degrees from the line of the crown) than almost all other forks, the Urbans have excellent tyre clearance and a rather distinctive 'wide' shape.
- Using the same pressed and then welded construction process for the steerer, these forks are stiffer than the 2006 models due to the extra thick steerer tube they now have.
- Available for 26" wheel bikes only, with a choice of dedicated Magura 4-Bolt mounts (spaced at 94mm) and a disc mount, V-brake mounts (also spaced at 94mm) and disc mount, or as a disc only set-up.
- 9mm thick CNC machined disc mount, to take the extra stresses of trials riding.
- Brushed aluminium or anodised black finish helps scratches stay un-noticed for longer and a top coat of lacquer helps them keep their shine.
- Weight: 810g (Disc Only).
- Weights including full length steerer tube.
Fork Dimensions
- Axle to Crown length: 402mm- Axle Offset: 45mm
- Steerer tube length: 220mm
TartyBikes Star Nut
£2.55
Trialtech Race Welded
£25.53
Trialtech Rim Tape
£2.55
Hope Hose Spares
From £0.85 to £4.26
Echo SL Headset
£34.04
Echo TR
£18.33





































hi, i have a Mavic EX721 front rim, would a traditional 4bolt mount system be close enough to the rim for the brake to work or would i have to buy adaptors? best regards
Posted by Sam on 22/01/2011
Reply from TartyBikes on 24/01/2011
Hi Sam - We just did some measurements and you should be able to use anything down to about a 25mm rim, meaning your EX721 should be fine. Thanks, Mark