Jitsie Forged ISIS Cranks

Product code: 12911

150mm	$44.34
160mm	$44.34
165mm	$44.34
170mm	$44.34

Sold out

Available in 150mm, 160mm, 165mm & 170mm lengths!

- High quality forged ISIS cranks from Jitsie!
- Forged from 7075 aluminium for maximum toughness.
- ISIS spline will work with any ISIS splined bottom bracket.
- Large scoops removed from the rear face of the cranks saves a good portion of weight.
- Standard 1.37" x 24tpi thread is compatible with most threaded freewheels and sprockets. All lengths have enough thread to be used with a bashring if you wish.
- 9/16" pedal thread works with all pedals we stock.
- Available in black with laser etched graphics, in 150mm, 160mm, 165mm, 170mm lengths.
- Weight: 498g (150mm), 517.4g (160mm), 521.1g (165mm), 549g (170mm)
- Offset: 31mm

Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check crank bolt torque is at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely damage your cranks and this will not be covered under warranty.

Please note that the minimum required thread contact between crank arm and sprocket/freewheel is 7mm, and a 1.37" sprocket/freewheel with maximum internal thread diameter 33.80mm (NOT 1.375") must be used. Failure to adhere to this instruction will damage the cranks threads and this is not covered under warranty.

Please note: due to the manufacturing processes used for these cranks, there may be small variations in concentricity between the freewheel and bottom bracket interfaces. This can lead to a certain amount of run out for any freewheel, sprocket or adaptor installed on the crank arm. While this isn't an issue on trials bikes, for applications requiring much higher tolerances we cannot guarantee they will be suitable. Please get in touch if you have any questions.