• Opening Hours.
    Thu: 9.30am to 5.00pm (UK)
  • United Kingdom.
    01772 32 33 33
  • International.
    0044 1772 32 33 33

Trialtech Screw On Freewheel

Product code: 12155

From $31.69 to $53.55

Check Stock

Trialtech Screw On Freewheel

16T, 108 Click
16T, 36 Click
16T, 72 Click
18T, 72 Click

Sold out

  • Available with 36, 72 or 108 engagement points!
- High quality freewheel from Trialtech, as featured on full-build Inspired bikes!
- Three (36 version), Six (72 version) or nine (108 version) high quality heat treated steel pawls are offset into groups of three into a tough 36 tooth ratchet, giving either 36, 72 or 108 engagement points per revolution.
- The bearing locking is also situated against the crank arm to keep it from coming loose - a nifty little feature!
- 72 & 108 versions use 4 large removal pockets that are also set into the other side of the freewheel: these do not stick out like tabs, which allows shorter bottom brackets to be run, and therefore better chain lines and increased chain life.
- 36 click version requires a 20 spline Shimano style bottom bracket tool for removal.
- 1.37" x 24tpi thread fits almost all hubs and cranks.
- Available in 16T and 18T size only.
-16t Only for use on rear hubs by 'full sized' riders (weighing over 45kg) - use on crank arms by riders over this weight may cause the outer to break and this isn't covered by the warranty. This is the same for all 16T freewheels and it is due to the reduction in diameter of the outer ring. For kids' bikes, these can be used on the cranks no problem.
- Weight: 16T - 165g / 18T - 176g

Overall Thickness: 17.56mm

This freewheel must be bedded in before trials use, to ensure any excess grease used when assembling the freewheel works away from the mechanism. You can do this by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use without having been bedded in, the pawls will not engage correctly and this causes the freewheel to skip, damaging the pawls and ratchet. If you wish to speed up this process, you can thin the grease down with light oil like GT85 or WD40, by spraying it between the centre and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.

Questions

There are currently no questions relating to this product.

Reviews

Write a review

100%

Based on 2 customer ratings

Indrek

single speed commuter epic transformation...

Posted by Indrek

So I have this Haro Objekt 28" singlespeed in addition to my Onza Genesis and oh dudes this freewheel just kills every other fixie-singlespeeder in my town(little town in estonia). So loud and this special sound from 6 pawls comes as a bonus. On par with my CK ISO HD or a tiny bit louder. Of course if a friend of mine from work buys it too I must upgrade to 108p Ti one or something :)

Reply from TartyBikes

Hello - Thanks for the detailed review, it's nice to hear you're happy with your new freewheel!

People who bought this also bought…

Jitsie Foam Grips (with Bar Plugs)

Product code: 12346

£8.00

100%

£8.00

  • Updated thinner design.

£8.00

In stock In stock

Add to basket

In stock

In stock

Inspired Truvativ V2 Integrated Bashring

Product code: 13344

£69.00

100%

£69.00

£69.00

In stock In stock

Add to basket

In stock

In stock

Kenda Standard 22"

Product code: 13796

£5.00

£5.00

  • Perfect for the Inspired Flow 22"!

£5.00

Out of stock Out of stock

Stock reminder

Out of stock

Out of stock

  • © TartyBikes Ltd, 2024
  • Tel. (UK). 01772 32 33 33
  • Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

  • Company No. 6131482
  • VAT. GB 860 0270 59

Web Design & Development by tame

Top

Cookies

This site uses cookies in order to provide our customers with the best possible shopping experience. You can choose to accept all cookies or customise your cookie preferences below. For further information please read our cookie policy