
Frame and Forks
- Frame: Inspired Fourplay 2011 (Gloss Lime Green or Gloss Dark Red)
- Forks: Inspired Fourplay, White (Lime Green), Black (Dark Red)
Wheels
- Front hub: Hope Pro2 with Hope QR, 32h, Black
- Rear hub: Hope Pro 2 NRB Trials, 32h, Black
- Cassette Lockring: Trialtech
- Chain tensioner: Trialtech Sport, Black
- Front rim: Inspired Team, 24", drilled, White
- Rear rim: Inspired Team, 24", drilled, White
- Spokes: Sapim Race DB
- Rim tape: Trialtech, Black
- Inner tube (front): Maxxis
- Inner tube (rear): Maxxis
- Front tyre: Maxxis Holy Roller 24 x 2.4"
- Rear tyre: Maxxis Holy Roller 24 x 2.4"
Brakes
- Front brake: Hope Inspired Tech 2-Trial 180mm Disc
- Rear brake: Hope Inspired Tech 2-Trial 180mm Disc
Drivetrain
- Cranks: Truvativ Holzfeller, 175mm, Black
- Front Sprocket: Truvativ 22T
- Chain: KMC Z610
- Rear Sprocket: Trialtech Sport Splined, 16T
- Pedals: Inspired Platform, White
- Bottom bracket: Truvativ Howitzer
- Bashring: Truvativ Trials
Seating
- Saddle: Inspired Pivotal, Black
- Seatpost: Inspired Pivotal
- Seat Clamp: Inspired
Steering
- Headset: FSA Orbit Equipe, 1-1/8", Black
- Stem: Trialtech Sport, Forged, 90mm x 25˚, Black
- Grips: Inspired Lock-On, Black
- Handlebars: Inspired Riser, White
Geometry
- Wheelbase: 1020mm
- Chainstay: 380mm
- BB Height: +20mm
- Head Angle: 73˚
Weight
- 11.60kg (including pedals)
Kenda Unboxed 24"
£3.40
Inspired Classic Design
£34.04
Kenda Downhill 24"
£7.66
TartyBikes Multi Tool
£6.81
IceToolz Combo Spanner
£5.96
661 Dirt Lid 2012
£20.83
Gusset Double Six Sprocket
£10.21
661 Rev 2012
£15.00








































Thanks for the replies but I have one more question, can you tell me more about what I all should get for the bike? like in the previous reply you told me : "Most parts on the bike should last quite a long time (apart from things like grips and innertubes)" what are grips and innertubes for and when do I need to change them? and what else should I get to maintain the bike? an example is maybe something to keep the brakes powerfull? thanks
Posted by indra on 19/05/2011
Reply from TartyBikes on 19/05/2011
Hi Indra - The grips are the rubber pieces on the bars that you hold onto. You only need to replace them once they've worn through which would usually take a few months at least. The innertubes are the tubes inside the tyres that hold the air. Depending on how you ride they can last a long time, or if you happen to ride over something sharp they might get a puncture. It's usually best to have a couple spare just in case, or have a puncture repair kit. The brakes on the Inspired bikes are very good and don't really require anything to maintain them. For bicycle disc brakes, leaving the rotors and brake pads alone is actually better for them. The only things I'd suggest getting for maintenance would something like the TartyBikes Multitool and the IceToolz Combo Spanner. This will help you keep things like the cranks and pedals tight when the bike is new which will make your bike as reliable as possible. When you buy a bike, you receive an information sheet with tips on how to do this. Thanks, Mark