Inspired Team V2.5 24"

Product code: 13278

New updated Inspired graphics as featured on Inspired Team bikes!

Available in: 32h only

- Inspired's Team V2.5 rim - as tested by team riders Ali Clarkson, John Langlois and Leo Nobile!
- Featuring an all-new custom extrusion that is much deeper than the previous Team rim, to give un-rivalled stiffness.
- High grade alloy construction improves durability.
- Unique inner wall profile helps promote stiffness.
- Rather than being pinned like most rims, the Inspired Team V2 rims are sleeved. The rim is connected and held together by an alloy sleeve rather than being welded or pinned, thus minimising any possible stress risers in this area.
- To help make seating your tyre a little easier, we recommend using a narrower rim tape such as the TartyBikes Rubber Rim Tape to avoid your tyre coming into contact with the edge of the rim tape.
- 34mm wide to give a good compromise of width for tyre stability, but a low overall weight.
- Tough anodised black finish with three laser etched Inspired logos on each side of the rim.
- Technically not suitable for tubeless setups, but can be made to work if you have a valve with a large enough head and seal the join with epoxy glue. This is at your own risk, however.
- Available in 32h drilling only.
- Weight: 434g
- ERD: 478mm

Hope Pro 4 Trials / SS Rear

Product code: 13104

£194.00

100%

£194.00

6 colours available

Rim review

Posted by Stephen

Got these rims as recommended by a friend very impressive with the weight and super hold quality and look amazing when built up,would highly recommend them

Reply from TartyBikes

Hi Stephen - we're glad to hear you like your new rims! Thanks for taking the time to leave them a review.

Browse…

Recently viewed

Shopping basket

My Account